Shanghai Shuo-an Information Technology Co.,Ltd

SABS 664 PN10/PN16 I(1)

Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]

gate valve-11
Specification: SABS 664 PN10/PN16 Iron Body Push-on Joint Ends Resilient Wedge
Detail: DN 50-DN250; VALVE BODY BONNET DUCTILE IRON A536 65-45-12 ; RESILIENT WEDGE DUCTILE IRON RUBBER-COVERED A536 65-45-12 EPDM/NBR ; STEM STAINLESS STEEL S41000 ; STEM NUT CAST BRONZE C83600 ;

gate valve-10
Specification: SABS 664 PN10/PN16 Iron Body Flanged Joint Ends Resilient Wedge
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; Flanged Ends CONFORMS TO SABS664 Freezing Weather Precaution ¨C Subsequent to testing a piping system, valves should be in an open position to allow comp...

gate valve-09
Specification: BS 5163 PN10/PN16 Iron Body Flanged Joint Ends Resilient Wedge
Detail: VALVE BODY BONNE DUCTILE IRON A536 65-45-12 RESILIENT WEDGE DUCTILE IRON RUBBER COVERED A536 65-45-12 EPDM/NBR STEM STAINLESS STEEL S41000 STEM NUT CAST BRONZE C83600

gate valve-08
Specification: DIN 3202 PN10/PN16 Iron Body Flanged Joint Ends Resilient Wedge
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; Flanged Ends CONFORMS TO DIN 3202

gate valve-07
Specification: 250 PSI AWWA C900 Iron Body Flanged x Push-on Joint
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; Flangedx IPS PVC Push-on 250 PSI/17.2 Bar Non-Shock Cold Working Pressure CONFORMS TO AWWA C900 Coating ¨C Electrostatically applied fusion-bonded epoxy...

gate valve-06
Specification: 250 PSI AWWA C900 Iron Body Push-on Joint Ends Resilient Wedge
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; IPS PVC Push-on 250 PSI/17.2 Bar Non-Shock Cold Working Pressure CONFORMS TO AWWA C900 Coating ¨C Electrostatically applied fusion-bonded epoxy 0.2-0.5m...

gate valve-05
Specification: 250PSI AWWAC509 Iron Body Rising Stem Flanged Joint
Detail: Fire Protection Valve &©|8226; Outside Screw and Yoke &©|8226; Resilient Wedge &©|8226; Epoxy Coated Interior/Exterior &©|8226; Pre-Grooved Stem for Supervisory Switch &©|8226; Drilled, Tapped and Plugged at Boss Location A** 2...

gate valve-04
Specification: 250 PSI AWWA C509 Iron Body Gate Valves
Detail: Fire Protection Valve &©|8226; Bolted Bonnet &©|8226; Indicator Post Pattern &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; Epoxy Coated Interior/Exterior 250 PSI/17.2 Bar Non-Shock Cold Working Pressure (160¡ã F/71...

gate valve-03
Specification: 50 PSI AWWA C509Iron Body Flanged Joint Ends Resilient Wedge
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; Flanged Ends 250 PSI/17.2 Bar Non-Shock Cold Working Pressure CONFORMS TO AWWA C509 Coating ¨C Electrostatically applied fusion-bonded epoxy 0.2-0.5m...

gate valve-02
Specification: 250 PSI AWWA C509 Iron Body Push-on Joint Wedge Gate Valves
Detail: Bolted Bonnet &©|8226; Non-Rising Stem &©|8226; Resilient Wedge &©|8226; IPS PVC Push-on 250 PSI/17.2 Bar Non-Shock Cold Working Pressure CONFORMS TO AWWA C509 Coating ¨C Electrostatically applied fusion-bonded epoxy 0....


Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]
1 2